Your Cart is Empty
Over 4500 items in stock - Ready to Ship to You
Over 4500 items in stock - Ready to Ship to You
EPL-100BT-12v-SLIM
Available in 12v 100Ah, the ePOWER B-TEC lithium battery is designed and intended for use in deep cycle applications where a single battery is required that meets the amp hour capacity.
Key Features:
Battery Specifications: The Enerdrive ePOWER B-TEC Slimline 100Ah/12V LiFePO4 Battery has a nominal voltage of 12.8V and a capacity of 100Ah, with a cycle life of ≥ 2000 cycles at 80% DOD.
Battery Management System: Equipped with an internal BMS that protects against overcharge, over-discharge, over-temperature, and short circuits, optimizing each prismatic cell for safe operation.
Smartphone Monitoring: Includes wireless monitoring technology, allowing users to track battery capacity, voltage, current, state of charge, state of health, individual cell voltage, temperature, cycles, alarms, and event information via a smartphone app.
Size and Weight Advantages: Offers 60% more usable power than AGM batteries, is nearly 50% lighter, and 30% smaller. Dimensions are 551mm (L) x 109mm (W) x 239mm (H), with a weight of approximately 12.5 kg.
Versatility and Usage: Ideal for camper trailers, 4WDs, caravans, small watercraft, and low-power communication sites. The battery can be paralleled with another of the same size for increased capacity, but no more than two should be connected. The 100Ah Slimline battery can accept a maximum inverter capacity of 1000W.
The Enerdrive Enerdrive B-TEC Slimline battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;
The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature and short circuit. The BMS helps to ensure safe and accurate operation of the battery.
Lithium v AGM Capacities;
The Enerdrive B-TEC battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.
The Enerdrive B-TEC Slimline battery is perfect for camper trailers, 4WD’s (AUX battery), caravans, small water craft, low power communication sites or any other application that requires the use of a single deep cycle battery that meets the amp hour capacity.
Please Note;The B-TEC Slimline battery is capable to be paralleled to a second B-TEC battery of the same size. For maximum performance and lifespan of your B-TEC Slimline battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.
The 100Ah Slimline battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.
| Normal Specification | EPL-100BT-12V-SLIM |
|---|---|
| Nominal Voltage | 12.8V |
| Nominal Capacity | 100Ah |
| Cycle Life (DOD – 80% under controlled conditions) | ≥ 2000 Cycles |
| Standard Charge Specification (Lithium profile charger required) | |
| Battery Charge Temperature | 0 ̴ 45°C |
| Normal Charge Voltage CV/CC* | 14.20 ̴ 14.60V |
| Standby (Float) Voltage | 13.50 ̴ 13.80V |
| Maximum Charge Current | 80A @ 25°C for 30mins |
| Recommended Charge Current for Maximum Life | 20A-50A |
| Standard Discharge Specification | |
| Battery Discharge Temperature | -20 ̴ 60°C |
| Battery Output Voltage Range | 11.00 ̴ 14.60V |
| Maximum Discharge Current | 100A@25°C ± 5°C for 30mins |
| Pulse Discharge Current | 250A for 1.0s |
| Discharge Cut-off Voltage | ≤11.20V |
| Circuit Protection | The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge and discharge, to protect the battery pack from overcharge, over discharge and short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery. |
| Over-Charge Protection | |
| Over-charge Protection Per Cell | 3.90V ± 0.03V |
| Over-charge Release Per Cell | 3.60V ± 0.05V |
| Over-charge Release Method | Discharge below release voltage |
| Over-Discharge Protection | |
| Over-discharge Protection Per Cell | 2.80V ± 0.05V |
| Over-discharge Release Per Cell | 3.20V ± 0.05V |
| Over-discharge Release Method | Apply Charge/Voltage ≥12.8V |
| Over Current Protection | |
| Discharge Over Current | 110A for 30s – 250A for 3s |
| Protection Reset Time | 5s Auto Release |
| Over Current Release Method | Disconnect Load |
| Over Temperature Protection | |
| Battery Discharge Over Temperature | Protection to 65°C ± 5°C |
| Release at 50°C ± 5°C | |
| Battery Charge Over Temperature | Protection to 55°C ± 5°C |
| Release at 45°C ± 5°C | |
| Short Circuit Protection | Auto release after 5s |
| Mechanical Characteristics | |
| Dimensions | Length 551mm |
| Width 109mm | |
| Height 239mm | |
| Weight | Approx 12.5 Kg |
| Storage Information | |
| Temperature and Humidity Range | ≤ 30 days -20°C ̴ 60°C, 5 ̴ 75% RH |
| ≥ 30 days -10°C ̴ 45°C, 5 ̴ 75% RH | |
| Self-discharge Rate | ≤ 3% Per Month |
Collections: Battery, D Collection, Gas Plumbing and Electrical
Type: Battery
Category: Battery, Std Shipping
