Over 4500 items in stock - Ready to Ship to You

0

Your Cart is Empty

AN-0003

Ezy Anchor Starter Pack Plus with Outback and Coastal Screws

This product is on order with our supplier (if no add to cart button is available, then we are not confident of the suppliers delivery date)

The Easiest and Strongest pegs you will use.

The Starter Pack Plus is designed for Caravanners, Campers and others who want to start with a multipurpose pack that set up for the use of the Ezy Anchors in the hard red and gravelly dirt of the Outback and also sandy loam soils such as Coastal parks.

  • 8 x Ezy Anchors
  • 4 x 200mm Long Outback Screws
  • 4 x 280mm Long Coastal Screws
  • 1 x Torx T50 Driver
  • 1 x Calico Storage Bag

Ezy Anchor is the product of some 25 years of camping and caravanning across Australia – from Fraser Island to Lawn Hill to Kakadu to Broome to Esperance, Broken Hill and beyond.

After 23 years of setting up and taking down camp in our tents, hard floor camper trailer, hybrid camper and now our caravan, there had to be a better way than driving and pulling pegs.

Installation:

  1. Use cordless drill or impact driver
  2. Connect the Torx driver bit to the drill/driver
  3. Pick up your Ezy Anchor with screw in position through the Ezy Anchor
  4. Connect your guy rope to the hook
  5. Hold the guy rope and hook together with your guiding hand
  6. Pick up the drill and driver in your driving hand
  7. Insert the Torx driver into the head of the screw
  8. Place drill in forward drilling position
  9. Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle.
  10. Installation complete

Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position.

Removal:

  1. With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head.
  2. Hold the hook and guy rope in one hand, place drill in reverse and screw out.
  3. Removal complete

In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground.

To find shipping costs - add items to the cart - open up shopping cart - at bottom of cart, enter postcode and shipping cost will display

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)