RV 80 BOARD with MONITOR - 40amp, DC/DC, Solar and 240volt.

Key features:

Reliable Performance: The ePOWER Low Battery Cutoff safeguards batteries from non-essential discharges, ensuring engine starting power and protecting connected appliances from overvoltage.
Microprocessor Control: Features 10 programs to manage voltage load engagement or disengagement across various voltage parameters.
Safety Features: Includes overvoltage protection, ignition proof design (no relay, no spark), delayed alarm output, and delayed load disconnect.
Versatile Applications: Suitable for recreational vehicles, service vehicles, and marine equipment.
Easy Installation: Designed for easy assembly with provided wiring and mounting instructions.

High Output: Provides 40A to 50A output with a 775W power rating, selectable battery types (Gel, AGM, Flooded, Lithium, Program).

Charging Control: Features four-stage charging (Bulk/Absorption/Float/Maintenance) and supports a variety of battery types.

Input and Efficiency: Accepts wide input voltage ranges (90 to 265 VAC), power factor correction, and 82% charger efficiency.

Protection and Features: Equipped with reverse polarity, overcharge, over temperature, and output short circuit protection, with forced air ventilation.

Environmental Specs: Operates in temperatures from -20° to 60°C, with IP32 ingress protection and includes an LCD display for monitoring charging status.

Comprehensive Kits: Enerdrive's RV Installation Kits are designed for 4WD canopies, caravans, camper trailers, commercial work vehicles, and more.

Versatile Layouts: Multiple layouts available to fit nearly every application, suitable for DIY handymen and professionals.

Pre-Wired for Simplicity: Kits are pre-wired where possible, with full wiring diagrams included for easy installation.

Durable Construction: Mounted on a 12mm black plastic board that is water and rot-resistant.

Service and Support: Enerdrive offers comprehensive service and support, with detailed knowledge of each kit's layout and wiring.

Ouput Rating
Output Voltage	12V Nominal (8.0V min)
Output Current (Maximum)	40A – 50A
Output power	775W
Charger DC Output (CH1):
Selectable Battery Type	Gel, AGM, Flooded, Lithium, Program
Charger Voltage Range	13.8V – 15.5V
Float Voltage Range	13.0V – 13.8V
Charger Current (User Selectable)	5/10/15/20/25/30/35/40/45/50A (default 40A)
Equalize Voltage (flooded Battery)	15.5V
Equalize Charging Current	10% of Bulk Current Setting
Charging Control	2 stage / 3 stage selectable (Default 3 stage)
DC Output Bank	Single
Current draw from CH1 when in use	= 50mA
Battery Temperature Setting	Low/ Normal/ High (Battery Temperature Sensor Standard)
Efficiency	95%
Input Rating (CH2 – MPPT Solar)
Input Voltage	14.5 – 45VOC
Maximum Input	≤23 input, 500W (600W allowable) ≥37.5-45V input, 750W (800W allowable)
Input Rating (CH3 – Start/Alternator)
Input Voltage	10.5 – 16VDC / 21 – 32DC
Dimensions
Height x Width x Depth	242mm x 172mm x 74mm
Unit Weight	1.85 Kg
Shipping Weight	2.17 Kg

EN31240-

Model	EN31220	EN31240	EN31260	EN32430
CHARGER OUTPUT
Output Current (Maximum)	20A	40A	60A	30A
OUTPUT VOLTAGE RANGE
Charge	14.2 – 15.5 V			28.4 – 31.0V
Float	13.4 – 13.8 V			26.8 – 27.6V
– Equalize	16.0 V			32.0V
Charging Control	Four stages (Bulk/Absorption/Float/Maintenance)
	Two stages (Bulk/Absorption)
	Constant Power Supply (Program setting)
	Priority Battery Bank Charging
DC Output Bank	Three (1 fully independent, 2 common with diode isolation)
Selectable Battery Type	Gel, AGM, Flooded, Lithium, Program
Standby Current	2 mA
CHARGER INPUT
AC Input Voltage (Nominal)	90 to 265 VAC
AC Input Operating Range	207-265 Vac (2.0 A Max)90-125 Vac (3.8 A Max)	207-265 Vac (3.8 A Max)90 – 125 Vac (7.7 A Max)	207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)	207-265 Vac (5.9 A Max)90-125 Vac (11.3 A Max)
AC Input Frequency Range	47 – 63 Hz
Power Consumption	350W (Full Load)	700W (Full Load)	1050W (Full Load)	1050W (Full Load)
Power Factor Correction	Yes
Charger Efficiency	82%
PROTECTION AND FEATURES
Reverse Polarity	Yes, (with user replaceable fuse/s)
Over Charge	Yes, unit shutdown
Over Temperature	Yes, unit de-rated and shutdown
Output Short Circuit	Yes, (with user replaceable fuse/s)
Cooling	Forced air ventilation (thermo controlled fan)
Temperature Setting	Hot, Normal, Cold (no sensor connected)
Battery Temp Sensor Port	RJ12 (standard battery temp. sensor supplied)
DISPLAY
LCD Display (with back light)	Charging status, Battery Voltage, Output Current and Fault Codes.
AC INPUT AND DC OUTPUT CONNECTION
AC Input Connection	IEC with Supplied 1.2M Power Lead
DC Output Connection	Heavy Duty Terminal (3 banks) – Pan Heads 6mm Thread
DC Output Ground	Single Heavy Duty Common Ground Stud
ENVIRONMENTAL AND OPERATING TEMPERATURE
Storage Range	-40° to 70° C
Operating Range	-20° to 60° C
Humidity	5-95%, relative humidity non-condensing
Ingress Protection	IP32 (Basic drip proof in vertical orientation)
Base Unit Weight and Dimensions
Weight: (kg)	2.4	2.6	4.0	4.0
Dimension: (mm) L x W x H	295 x 206 x 86	295 x 206 x 86	356 x 206 x 99	356 x 206 x 99
Optional Accessories	Remote Digital Display / Enerdrive Part Number EN3REM
Regulatory Compliance	Complies with AS/NZS 60335.2.29 Including Australian deviations.

Currency

D Collection